2006 Giddings & Lewis VTC1600 VTL w...

  Specifications: Bore Diameter: 7.87″ Max. Swing: 78.74″ Driving Power: 100.6 HP X-Axis Travel: 47.63″” Z-Axis Travel: 68.69″ Spindle Speed: 4,000 RPM Tool Changer: 26 ATC Equipped With: 4 Jaw Independent Manual Chuck with 12 Radial T-Slots 62.99″ GE Fanuc 160i-TB High Performance CNC with Hand Held Renishaw HPMA Tool Probe Part Probe

2012 Force One EVL-12 CNC VTL

2012 Force One EVL-12 CNC VTL Specifications: Max. Turning Diameter 62.99” Ram Nose to Table 47.44″ Max. Cutting Height 47.24 Swing 62.99” Spindle Motor 60.3 HP Spindle Speed 312 RPM Equipped With: Independent Jaw Manual Chuck Fanuc OiTD CNC Control 2 Spindles

1987 Giddings & Lewis VTL

1987 Giddings & Lewis VTL Specifications:  Chuck Size: 18″ Hydraulic XYZ Travels: 20″ x 20″ x 50″ Spindle Speed: 1,200 RPM Spindle Motor: 20 HP Equipped With:  Fanuc OM G-Code RS-232

1999 Okuma & Howa 2SP-V-55 Vertical...

1999 Okuma & Howa 2SP-V-55 Vertical Chucker Specifications: Thru Hole Diameter 4.33” Chuck Size 18″ Distance Between Spindle Centerline 31.49” Max. Cutting Diameter 21.65” Max. Cutting Length 16.14” Spindle Speed 20-2000 RPM Spindle Nose JIS A2-8 Spindle Motor 45 HP Equipped With: (2)18″ Chucks Dual Rear Chip...

2007 Doosan Puma VT1100 CNC Vertical Tur...

2007 Doosan Puma VT1100 CNC Vertical Turning Lathe Specifications: Table/Chuck 32” Max. Swing 50” Max. Turning Height 39.37” Table Speed 5–850 RPM Speed Ranges 2 Speed Geared Turret Capacity 12 Spindle Motor – Main Table 75 HP Equipped With: Fanuc OiTB CNC Control with 9″ CRT Screen RS-232C Interfaces for DNC Operation 32″ Heavy Duty 3-Jaw Chuck Chip...

124” Bullard Dyn-AU Tape VTL

124” Bullard Dyn-AU Tape VTL Specifications: Table Diameter w/t-slots 124″ Maximum Swing 140″ Maximum Height Under Rail 65″ Table Speeds 66RPM Equipped With: Retro-fit with Fanuc 15T Control Ram on Rail Ball Screws & way covers Chip Conveyor &...

2001 Haas VTC-48-Sold

2001 Haas VTC-48 Specifications: Table Size 48” x 28” Max. Diameter Swing 48” Spindle Taper 50 Turning Platter 20-200 Equipped with: RJH, Remote Jog Handle CC, Standard Chip Auger FD3, 3.5″ Floppy Disk Drive & interface 1.44MB SOM, Spindle...

2012 Hwacheon VT950 CNC VTL-Sold

2012 Hwacheon VT950 CNC VTL Specifications: Chuck: 32″ Swing: 43″ Max Turning: 37.4″ Max Turn Length: 33.5″ Max Chuck Capacity: 1,100 Lbs Spindle Speed: 800 RPM Turret Positions: 12 Equipped With Fanuc Control Flood Coolant Chip Wash Automatic Door LNS Turbo Chip Conveyor w/ Rear Disposal This machine is being sold to the highest bidder in the multi-shop online auction ending Feb. 12th at 2pm ET. Click HERE for more...

76” Bullard Dynatrol VTL-Sold

76” Bullard Dynatrol VTL                Specifications: Chuck: 76″ 4-Jaw Independent Chuck Max Swing: 86″ Under the Rail: 96″ Ram Travel: 44″ 4-Position Index Turret Travel: 28″ 5-Position Index Main Motor: 100 HP Spindle Speed Low: 6 – 27 RPM Spindle Speed High: 26 – 123 RPM Equipped With: GE Fanuc 15TT Control High Column Enclosure Chip Conveyor This machine is being sold to the highest bidder in the multi-shop online auction ending Feb. 12th at 2pm ET. Click HERE for more...

Mazak A16 Megaturn CNC VTL-Sold

1984 Mazak A16 Megaturn CNC VTL SPECIFICATIONS: Table Diameter 65″ Maximum Cutting Diameter 69″ X Axis Travel – Horizontal 70” Z Axis Travel – Vertical 50.2″ Vertical Cross Rail Travel 4 Steps / 11.81″ each Table Horsepower 80 HP Spindle Speeds 1 – 300 RPM Number of Tool Positions 16 Position ATC EQUIPPED WITH: Fanuc 6TB control This machine is being sold to the highest bidder in the multi-shop online auction ending Feb. 12th at 2pm ET. Click HERE for more...